BNPNG - 3010360, A-1177-B-2 TWO PART EPOXY
- MSDS: BNPNG
- Manufacturer: BF GOODRICH THE ADHESIVE PRODUCTS DIV
- Product Name: 3010360, A-1177-B-2 TWO PART EPOXY
- National Stock Number: 8040-00-270-8137
Product Identification
Product ID:3010360, A-1177-B-2 TWO PART EPOXY
MSDS Date:03/10/1993
FSC:8040
NIIN:00-270-8137
Kit Part:Y
MSDS Number: BNPNG
Responsible Party
AKRON, OH 44318
US
Emergency Phone: 216-374-3000
Info Phone: 216-374-3000 / FAX 216-374-2333
Preparer: CIFFORD PEARSON
Cage: 1HS43
Contractor
Telephone: 330-374-2786 / 330-374-2900
Cage: 1HS43
Ingredients
POLYAMIDE
CAS: 68410-23-1
Fraction By Weight: 50%
CALCIUM CARBONATE
CAS: 1317-65-3
RTECS: EV9580000
Fraction By Weight: 50%
OSHA PEL 10 MG/M3
ACGIH TLV: 10 MG/M3
NONE
RTECS: 9999999VO
Hazards
Health Hazards Acute and Chronic:SOME PEOPLE MAY DEVELOP ALLERGIC
REACTION.
Effects of Overexposure:MINOR TRANSIENT IRRITATION OF EYES AND SKIN.
Medical Cond Aggravated by Exposure:SKIN RASHES
First Aid
First Aid:FLUSH EYE WITH WATER FOR 15 MINUTES HOLDING EYE LIDS OPEN.
SEE A PHYSICIAN. WASH SKIN WITH SOAP AND WATER. SEE A PHYSICIAN IF
RASH DEVELOPS. REMOVE TO FRESH AIR. GIVE ARTIFICIAL RESPIRATION IF
NOT BRE ATHING. CONSULT A PHYSICIAN.
Fire Fighting
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:DO NOT ENTER CONFINED FIRE SPACE WITHOUT
PROPER PROTECTIVE EQUIPMENT INCLUDING A NIOSH APPROVED
SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:NONE KNOWN
Accidental Release
Spill Release Procedures:AVOID EYE AND SKIN CONTACT. SCRAPE UP OR
ABSORB AND PLACE IN CONTAINER FOR DISPOSAL.
Handling
Handling and Storage Precautions:STORE IN A COOL, DRY AREA, AWAY FROM
SOURCES OF HEAT. KEEP AWAY FROM CHILDREN.
Exposure Controls
Respiratory Protection:NOT NORMALLY NECESSARY. USE ORGANIC VAPOR FOR
FUMES FROM HEATED MATERIAL.
Ventilation:LOCAL AT A POINT OF CORE OR HEATING.
Protective Gloves:NEOPRENE
Eye Protection:GOGGLES
Other Protective Equipment:EYE WASH AND SHOWER IN AREA.
Supplemental Safety and Health
KEY1:T6.
Chemical Properties
HCC:N1
NRC/State Lic Num:NONE
Vapor Density:>1
Spec Gravity:1.42
Viscosity:>50,000 CPS
Appearance and Odor:TAN PASTE, AMINE ODOR.
Percent Volatiles by Volume:NONE
Stability
Stability Indicator/Materials to Avoid:YES
EPOXY RESINS
Stability Condition to Avoid:AVOID MIXING WITH LARGE AMOUNTS OF EPOXY
RESIN. NO MORE THAN TWO POUNDS.
Hazardous Decomposition Products:CARBON DIOXIDE, CARBON MONOXIDE,
AMMONIA AND OTHER TOXIC FUMES.
Disposal
Waste Disposal Methods:THIS MATERIAL IF DISCARDED MAY BE HAZARDOUS.
DISCARD IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS.
INCINERATION IS PREFERRED METHOD.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.